Particle Separation in an Annular Converging Channel with an Inner Rotating Permeable Baffle

The relation between the separation efficiency of solid particles and the stability of the helical flow of a viscous fluid in a converging channel with an inner rotating permeable cylindrical baffle has been studied. The profiles of the axial and tangential velocities and the separation efficiency of solid particles have been calculated based on the numerical solution of a system of equations describing the hydrodynamics of two-phase media. Analysis of the obtained solutions shows that vortices having an effect on particle separation can appear in the converging channel. Moreover, the larger the size of the converging annular channel, the earlier a loss of stability occurs. It has been found that the formation of vortices is impossible for some flow regimes and, as a result of fluid flow stabilization, the fraction of particles settled on the permeable cylindrical baffle decreases. It has been shown that those regime parameters at which a helical flow exists should be selected for the development of combined action units involving filtering and the separation of the solid dispersed phase.     

The Role of Excitation Photons Energy in the Photoinduced Carrier Dynamics in InGaAs/InAlAs Superlattice Heterostructures

Technical Physics Letters - The influence of excitation photons energy on the relaxation times of photoexcited carriers is studied. The involved relaxation mechanisms are evaluated and the...     

Chemical-Spectroscopic Determination of the Isotope Composition and Gravimetric Content of Uranium in Uranium–Aluminum Alloys and Products of Their Processing

Conditions of chemical separation of Al macroamounts and U microamounts, followed by atomic emission spectroscopic determination of the isotope composition and gravimetric content of U, were studied. An algorithm was developed for constructing calibration plots to determine the ²³⁵U/²³⁸U isotope ratio in various samples from nuclear fuel reprocessing. Optimum conditions of the spectral analysis for the U content were found by mathematical design of the experiment: NaCl content 2%, current 18 А, and exposure time 40 s. With the use of these conditions and of a specially developed form of carbon electrode, the uranium detection limit was decreased from 10^–3 to 10^–5%.     

Expanding the Spectrum of Antibiotics Capable of Killing Multidrug-Resistant Staphylococcus aureus and Pseudomonas aeruginosa

Infections from antibiotic-resistant Staphylococcus aureus and Pseudomonas aeruginosa are a serious threat because reduced antibiotic efficacy complicates treatment decisions and prolongs the disease state in many patients. To expand the arsenal of treatments against antimicrobial-resistant (AMR) pathogens, 600-Da branched polyethylenimine (BPEI) can overcome antibiotic resistance mechanisms and potentiate β-lactam antibiotics against Gram-positive bacteria. BPEI binds cell-wall teichoic acids and disables resistance factors from penicillin binding proteins PBP2a and PBP4. This study describes a new mechanism of action for BPEI potentiation of antibiotics generally regarded as agents effective against Gram-positive pathogens but not Gram-negative bacteria. 600-Da BPEI is able to reduce the barriers to drug influx and facilitate the uptake of a non-β-lactam co-drug, erythromycin, which targets the intracellular machinery. Also, BPEI can suppress production of the cytokine interleukin IL-8 by human epithelial keratinocytes. This enables BPEI to function as a broad-spectrum antibiotic potentiator, and expands the opportunities to improve drug design, antibiotic development, and therapeutic approaches against pathogenic bacteria, especially for wound care.     

On Application of Carbon-Containing Electrode Materials in Technology of Electrospark Alloying: Part 1. Peculiarities of Coating Formation Using Electrospark Treatment of Titanium Alloy OT4-1

Electrospark treatment of OT4-1 titanium alloy was performed sequentially with a STIM-20N hard-alloy electrode (TiC–20% Ni) and carbon-containing material (graphite and carbon-based composite materials). Kinetics of the mass transfer of the hard-alloy electrode was studied. The cathode mass loss during the first minute of the treatment was established. The kinetics results were processed using the methods of mathematical statistics. The erosion resistance of the applied carbon-containing materials was determined. Phase composition and relief of the coatings formed were analyzed. It was found that the application of the carbon-containing material increases the content of refractory phases in the coatings. Increase in the time of the treatment using the carbon-containing materials decreases the roughness of the coatings.     

Directed Molecular Collection by E‐Jet Printed Microscale Chemical Potential Wells in Hydrogel Films

A facile approach to locally concentrate analytes of interest will significantly enhance miniaturized, integrated chemical‐analysis systems. Here, the directed analyte transport and concentration using ≈200 µm‐diameter E‐jet printed chemical potential wells in a polyacrylamide hydrogel is demonstrated. Using a cationic well as the model system, anionic analytes are accumulated into a microscale area with a local concentration enhancement of >50‐fold relative to the surrounding area. By downscaling the diameter of the chemical potential well from a few millimeters to 100s of micrometers, it is found, using both fluorescence and Raman microscopy, that the molecular collection capacity of the well is greatly improved. Additionally, it is shown that molecules can be simultaneously transported and concentrated to arrays of microscale regions using an array of microscale chemical potential wells. This approach enhances many‐fold the limit of detection, enables the formation of microscale potential well arrays with a variety of chemical properties, and provides a novel microscale molecular manipulation technique as an alternative to traditional microfluidic‐based systems.     

A Giant Frequency Shift in the Raman Spectrum of Water Adsorbed on a Metallic Silver Surface

The Raman spectrum of water adsorbed on a metallic silver surface reveals an anomalously large shift of the vibrational frequency as compared to that in the bulk. The results are compared to data reported by other researchers, and possible interpretations of the observed phenomenon are discussed.     

Erosion Characteristics of Copper-Based Composite Electrodes in an Electric Arc of Variable Length with Transverse Gas Blowing

We present experimental data on the erosion of electrodes made of copper-based pseudoalloys during contact breaking at current amplitudes up to 150 kA in nitrogen at a pressure of ~2 MPa with transverse gas blowing. The electric-erosion characteristics of copper–iron pseudoalloy CuFe (85/15%) electrodes obtained by laser layer melting, as well as CuFe (70/30%) and CuW (25/75%) pseudoalloy electrodes fabricated by traditional powder technology (sintering of pressed powder compacts) are reported. The specific erosion of electrodes in variable-length arc amounts to ~1 mg/C, which somewhat exceeds the value observed for a fixed-length arc discharge gap.